Tractors

Plows

Agricultural machinery

Forestry equipment

Spare parts

Подвал ACF - категории (en)

site_logo_2-2

Site_logo_2

tractors - agricultural equipment - spare parts

Header - ACF

Header - ACF - Smolselmash

Smolselmash

https://back.smolselmash.ru/wp-content/uploads/2021/02/Site_logo_2.png

Loaders

Production

Slide bearings

Oils

Antifreeze

АdBlue®

Brake fluid

Lubricants

Windshield washer fluids

Spare Parts

Главное меню ACF в шапке (en)

Sales

Price list

Shop

Service

Delivery

Payment

Purchase returns

Information

Contact us

Меню ACF второго уровня в шапке (en)

The units are used to equip plows of different types, for the purpose of plowing soils for grain and industrial crops to a depth of 30 cm. When choosing a body, take into account the composition and condition of the top layer of the earth, as well as under which plants the plowing is carried out.

The Smolselmash company provides a wide selection of plows that perform specific functions. Our managers will advise you for what purposes this or that model is suitable, select the necessary configuration to complete your tasks, taking into account the budget.

korrusa-dlya-plugov

Plow bodies

The units are used to equip plows of different types, for the purpose of plowing soils for grain and industrial crops to a depth of 30 cm. When choosing a body, take into account the composition and condition of the top layer of the earth, as well as under which plants the plowing is carried out. The Smolselmash company provides a wide selection of plows that perform specific functions. Our managers will advise you for what purposes this or that model is suitable, select the necessary configuration to complete your tasks, taking into account the budget.

Архивы Plow bodies

Архивы Plow bodies - Smolselmash

Главная страница

PLP-01.000 (PLD-06.000) bodies are equipped with plows of our production of types PLN, PN, PLP for plowing soils for cereals and industrial crops to a depth of 20-27 cm, with a resistivity of up to 0.1 MPa (1.0 kg s / cm² ) and a working speed of 6-9 km / h.
A body with a plow-moldboard surface of a semi-screw type improves the seam turnover and, in combination with a coal removal (installed instead of a skimmer), ensures the incorporation of stubble residues into the soil with a quality of up to 98% - when plowing discarded stubble and 95% when plowing perennial grasses on sod-podzolic loams, with soil moisture of 17-23%, which is more efficient (by 6%) and less energy intensive (by 2.7%) than analogues produced in the CIS countries.
All parts of the semi-screw housings are unified. Housings of types PLN and PLD differ only in the fastening of the rack (or the beam for the PLD) to the shoe; for the PLP case - on 4 bolts, for the PLD case - on 3 bolts.
The toe of the body is reinforced with a special pad (chisel), which increases the wear resistance of the plowshare and blade chest. The pad (chisel) and the share are made of 65G steel and are thermally treated, which increases their service life up to 30-35 hectares. The composite blade (chest and blade), as well as the reverse sidewall (the ability to rotate it 180 degrees), increase the working time of these parts, contributing to a decrease in the mass of spare parts. The mouldboard chest and fender are made of 8 mm manganese steel with volumetric heat treatment that significantly increases their wear resistance.
The stand of the PLP-01.000 body is interchangeable with the plow post of the PLN type manufactured by Odesselmash OJSC, which allows you to install the PLP-01.000 semi-screw bodies (assembled) on the plow frames of the PLN type available in the CIS countries.
MINSK SESTEREN PLANT OJSC

Smolselmash_53

Plow body with semi-screw blade "PLP-01.000" (PLD-06.000)

Plow body with semi-screw blade "PLP-01.000" (PLD-06.000) - Smolselmash

Plow body with semi-screw blade &#8220;PLP-01.000&#8221; (PLD-06.000)

Plow bodies PK 20.010 (PK 20.010-01 - turning) are equipped with plows of our production type PO for plowing soils for grain and industrial crops with a resistivity of up to 0.1 MPa (1.0 kgf / cm²), to a depth of up to 30 cm and a working speed 7 - 9 km / h.
This body is an analogue of body No. 9 manufactured by the Norwegian company "Kverneland" and has an original design: - an elongated semi-screw blade (without blade blade), the angle in plan between the share and the furrow wall is 38 degrees. The reversible chisel is attached directly to the share. The body provides plowing of soddy soils with a large amount of plant residues, plowing of green manure by 98%, with a moisture content of the treated layer up to 25%, and is less energy-intensive (by 15%) compared to bodies with a grip of 40 cm. Produced in the CIS countries.
All highly wear parts of the body are made of high quality steels (65 G, 60 PP) and heat-treated.
A leaf spring mechanism is used to protect the bodies when working on stony soils.
This body has no analogues in the production of tractor plows in the CIS countries.
Minsk Gear Plant OJSC

Smolselmash_52

Plow body with extended semi-screw blade "PK 20.010" (PK 20.010-01)

Plow body with extended semi-screw blade "PK 20.010" (PK 20.010-01) - Smolselmash

Plow body with extended semi-screw blade &#8220;PK 20.010&#8221; (PK 20.010-01)