tractors - agricultural equipment - spare parts

tractors - agricultural equipment - spare parts

+7 495 241 01 07

Chipping machine "BELARUS MR-100"

    Model description

    Chipping machine "BELARUS" MR-100 is designed for the production of fuel chips from round and chopped timber, low-quality wood, sawmill and woodworking waste.

    Manufacturer: Mozyr Machine-Building Plant OJSC

    Product categories: Chipping machines, Forestry equipment

    Price on request

    General characteristics

    • Brand: BELARUS
    • Model: MR-100
    • Type: Mobile on a single axle semi-trailer
    • Drive unit: From a stand-alone diesel engine
    • Semitrailer: Uniaxial, four-wheel, balanced
    • Energy remedy: Tractor "BELARUS" TR 1221 TU BY 101483199.582
    • Chip productivity, cubic meters per hour, not less: 100
    • The highest permissible speed of the vehicle, km / h: 30
    • The smallest ground clearance, mm: 410
    • Semi-trailer track gauge, mm, no more: 2120
    • Air pressure in semi-trailer tires (16.5 / 70-18 KF-97), MPa: 0,37±0,01
    • Trailer coupling: TSU-2 in accordance with GOST 3481
    • Semi-trailer axle load, no more, kN: 130
    • Specific total operational labor intensity of maintenance man-h / h, no more: 0,2
    • Mean time between failures of II and III complexity groups during the warranty period, h, not less: 500
    • Machine service life, years: 6
    • Operating weight, kg: 20 450±300
    • Manufacturer: Mozyr Machine-Building Plant OJSC

    Standalone engine

    • Model: Deutz BF06M1013FC
    • Type: Turbocharged and intercooled
    • Number and arrangement of cylinders: Six, in-line, vertical
    • Working volume of cylinders, liters: 7,146
    • Rated power, kW: 223,0
    • Operating power, kW: (202,0)^+5,0-6,0
    • Rated speed of the crankshaft, min-1: 2300
    • Specific fuel consumption at operating power, g / (kW / h): (248)^+12,45
    • Rated safety factor of torque: 30
    • Specific oil consumption for waste, determined according to GOST 18509, g / (kW / h): 0,2^+0,2
    • Maximum torque, N / m: 1000

    Hydraulic manipulator GM-50.2

    • Load moment, kNm: 45,0
    • Maximum reach of an arrow, m: 8,5
    • Angle of rotation in the horizontal plane, not less: 380°
    • Hydraulic manipulator control: By joysticks from the cab, a distributor with electro-hydraulic proportional control of lifting and lowering of the stick, boom and their reversal, as well as rotation of the rotator and disproportionate control of the grip and extension section
    • Maximum pressure of the working fluid in the hydraulic system circuit of the hydraulic manipulator, MPa: 23
    • Maximum productivity of the hydraulic manipulator pump, liters per minute: 60

    Hydraulic manipulator GM-50-01

    • Load moment, kNm: 45,0
    • Maximum reach of an arrow, m: 7,2
    • Angle of rotation in the horizontal plane, not less: 180°
    • Hydraulic manipulator control: By joysticks from the cab, a distributor with electro-hydraulic proportional control of lifting and lowering of the stick, boom and their reversal, as well as rotation of the rotator and disproportionate control of the grip and extension section
    • Maximum pressure of the working fluid in the hydraulic system circuit of the hydraulic manipulator, MPa: 23
    • Maximum productivity of the hydraulic manipulator pump, liters per minute: 60

    Chopping unit

    • Model: Jenz HEM 420 R
    • Nominal dimensions of the receiving window (width / height), mm: 990/420
    • Cutting mechanism: Drum, multi-cutter
    • Number of knives: 10
    • Feeder: Forced
    • Chip ejection: Upper, with a device for changing the height and direction of the discharge to a height of at least 4m
    • Reverse feed in case of overload: Auto

    Overall dimensions in transport position, mm

    • length: 11 600±100
    • width: 2450±50
    • height: 3650±50